How far the ribs twist as they rise. At 0 they run straight up; at 1 each rib makes a full turn between the bottom ring and the top ring.
Sets how many ribs go around the vase. Each ring is divided into three times this many points, and a rib runs through matching points on every ring.
Added to the radius of the narrow rings at the bottom and below the top, in model units. Their base radius is 1.
Added to the radii of the wide rings, in model units. The bulge is an ellipse with base radii 2 and 2.5, and the top opening is a circle with base radius 1.5.
Added to the height of the bulge above the bottom, in model units. It also raises every ring above the bulge by the same amount.
Added to the distance from the upper narrow ring to the top opening, in model units, which lengthens the neck of the vase.
Wall thickness at the thickest ribs, in model units. The wall alternates between thick and thin ribs around the vase, and the thin ones are a fifth to a quarter of this.
Turn of the finished vase around the vertical Y axis, in degrees, applied before it is moved to
origin.
Point the center of the vase's bottom is moved to.
Parameters of
things.threeDPrinting.vases.serenitySwirl.create. The radius and height values are added to the vase's fixed base proportions,swirlandnrOfDivisionsshape the ribs, androtationandoriginplace the finished vase.